Home widget top left

You can add widgets here from Admin->Appearance->Widgets

Home widget top right

You can add widgets here from Admin->Appearance->Widgets

Blog

Tip for Attaching Craft Eyes through Thick Layers

niccup crochet logo Today’s guest post is written by Nichole of Niccup Crochet.

I’m really excited about this post, because Nichole has come up with a solution (little did I know until she mentioned it!) that has been plaguing many crocheters. When attaching craft eyes (or ‘safety eyes’) to an amigurumi, it can be really tough to get the post through multiple layers.

Nichole is sharing her clever solution with us, today!

She’s demonstrating the technique on Nel the Tiny Owl, who she’s crocheted in a St. Patrick’s Day colorway. You can find instructions for the adorable pot of gold on Nichole’s blog!

Crocheting Nel, the Tiny Owl, was a smooth-sailing until it came time to attach his eyes. Eeek! I could not get the safety eye attached securely (enough). The washer locked over the outer-most ridge of the safety eye and no amount of force could get it to lock any further.

The anatomy of the problem


problems attaching a safety eye through multiple layers

The post of the safety eye is only so long. It has locking points on the post and the washer slides over the ridges to secure the safety eye in place. The problem with Nel is that the safety eye has to be forced through three layers of fabric. Most of the post is surrounded by the fabric layers and very little is left sticking out the bottom where the washer needs to be secure.

Work Smarter, Not Harder

I attempted to secure his second eye with needle-nose pliers. That was a bad idea! The pliers slipped and I damaged poor Nel’s eye. No amount of force was going to work…the fabric was just too thick.

I took a step back and looked at all of the pieces involved. There just had to be another way.

attaching craft eyes through thick layers

Then, it dawned on me: the safety eye can be attached to the eye circle before sewing the eye circle onto Nel’s head. Sometimes the best solution is the simplest one.

Attach the safety eyes through the middle of the eye circle.

Then, you will sew the eye circles onto Nel’s head. As you are doing this, make sure you force the post down through the other layers of fabric. This will keep the eye from bulging out.

InsertingEye

I hope this helps you as you crochet your next Nel, Nelson or a few other FreshStitches patterns.

St Patricks day Nelson the Owl

3 Responses to “Tip for Attaching Craft Eyes through Thick Layers”

  1. I had that problem when I made my Nelson. I snuck into my hubby’s tool box to borrow some plyers to squeeze it together. Your solution is simple and functional! It made me say: “DUH!!!” Thanks again Stacey!

  2. Aimee (Ravelry - Missworld) says:

    I use pliers normally (I find that for Nel the 3 layers is still too thick – and I use the above technique as well!) – but I have trouble with safety eyes period. My hands are too weak! So first I cover the safety eye with a plastic or cloth sheet and then use the pliers – the plastic protects the eye from damage!
    Thanks for the tips!

  3. Michelle says:

    I really like your little pot of gold! cute!

Leave a Reply